1750 Degree Operating Laboratory Sintering Muffle Furnace For Ceramic Zirconia Gem Nano Materials Heat Treatment

1750 degree ceramic electric sintering furnace is our main product-Muffle furnace.The Muffle furnace consists of high quality alumina fiber and MoSi2 heating elements with special design,and furnace temperature controlled by high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1 degree and 50 segments programmable.

The furnace widely used for materials annealing,ceramic sintering ,melting and most heat treatment experiments in your research laboratory.

Send Inquiry
描述

描述

1750.C Sintering Muffle furnace Application:

Muffle furnace mainly used in chemical analysis, physical decomposition and synthesis,

super hard materials (such as ceramic), Rare and precious metal smelting and purification,

metal heat treatment of sintering process research and other scientific experiments.

Universities and colleges, scientific research institutes, medical and health, petroleum chemical

industry, mining enterprise, quality and technology supervision agencies,

and other units laboratory, laboratory are the use of such equipment.

1. Gravimetric analysis;

2. Sintering;

3. Quantitative analysis;

4. Heat treating;

5. Glass preparation;

1750 degree ceramic electric sintering furnace is our main product-Muffle furnace.The Muffle furnace consists of high quality alumina fiber and MoSi2 heating elements with special design,and furnace temperature controlled by high precision SCR (Silicon Controlled Rectifier) digital controller with accuracy ±1 degree and 50 segments programmable.

The furnace widely used for materials annealing,ceramic sintering ,melting and most heat treatment experiments in your research laboratory.

1750.C laboratory sintering muffle furnace technical details:

Rated Voltage & Power:AC 110V / 220V 50/60Hz, 2kw
Inner Chamber Size:D200xW150xH150mm, 4.5 Liters.

More size : 100x100x100mm, 200x150x150mm, 300x200x200mm,400x300x300mm available.

Max. Temperature:1800.C for short time ;
Continuous Working Temperature:1750.C Max.
Chamber Materials:Al2O3 plate + High quality Alumina ceramic fiber
Max. Heating Rate:0-30.C /min, suggest to be 10.C/Min under 1400.C,5.C/min at 1400.C-1600.C, 2.C/min >1600.C;
Temperature Controller:PID automatic control and auto-tune function,

30/50 programmable segments for precise process.

Temperature Accuracy:+/- 1 .C.
Heating Element:High quality MoSi2 heater.
Thermocouple :B type
Standard Parts:Crucible tongs 1pc, High temperature gloves 1 pair , one user manual.
Optional parts:PLC touch screen controller, paperless recorder,Remote communication control system, RS485 Communications Port , adding inlet gas hole or exhause gas hole .

Warranty: One year limited warranty with lifetime support, excluding heating element,cooling fans, thermocouple and ceramic tube damaged by user.

Attention: Any damages caused by the use of corrosive and acidic gases, and any damage from wrong operate and use are not under the coverage of One Year Limited Warranty.

 

1750.C sintering Muffle furnace Application Notes:

(1)The MoSi2 heating element must not be used at low temperatures (400°C-700°C) for a long time, otherwise the heating element may be damaged.
(2)This box furnace does not use a vacuum seal structure, so do no Use flammable or explosive gas.
(4)After Using a certain period of Muffle furnace, there will be minor cracks in the hearth. This is a normal phenomenon and will not affect the use. At the same time, it can be repaired with an alumina coating.

Shipping & Delivery

Shipping way : By Courier / By sea / By Air /By land/ By Train Optional, depend on clients' demand of time and cost.

Shipping terms: Support EXW /FOB/C&F /CIF/ CPT/CIP /DDU /DDP terms....

Even for some countires with high taxes and some Remote areas, we can ship goods to your Door address and including taxes.